1/2x.020 (13x0.50mm) CT Medium 60/85 Diamond Grit welded-to-length only $ per ft.
Diamond Grit Band Saw Material
If your material cannot be cut satisfactorily with carbide grit bands, then we recommend diamond grit bands. Typical materials that can be cut with these blades are glass-fired ceramics, stone, silicon, Pyrex, laminated fiberglass, etc.
* Roller guides and rubber-coated idle and drive wheels are recommended * Minimum Band Wheel Diameter: 12" (300mm) for gulleted blades * Use continuous edge on cross sections up to 5.8" (16mm) * The use of fine, medium or coarse grit should be determined by the finish required * Increase the life of the blade by turning the blade inside-out from time to time. This presents a new edge to the work * Blade Tension: 15,000-20,000 PSI (1,000-1,250kg/cm)
Item: 1/2x.020 (13x0.50mm) CT Medium 60/85 Diamond Grit welded-to-length only $ per ft. Product: Diamond Grit Band Saw Material No: I95123
PRODUCT ITEMS: Description 1/2x.020 (13x0.50mm) CT Medium 60/85 Diamond Grit welded-to-length only $ per ft. Width x Thickness 1/2" x .020" (13 x 0.50mm) Tooth Type Continuous (Stainless Steel) Grit Medium 60/85